Loss and Gain of Roof Water Damage And What To Do

In the fall, with all its rains and bad weather, water damage should be one of the biggest concerns for a homeowner. Water is perhaps among the major causes of increased roofing system aging, especially flat roofs that you can find on many commercial and industrial buildings. In the result of rainfall, melted snow or any type of leakages water fill-up can contribute to the deterioration of the roof surface as well as such issues as mold and decay.

Fortunately for the owners of commercial and industrial buildings, flat roofing systems have positive drainage. This suggests roofing water can move, though slowly, in the direction of scuppers or gutters on the side of building that release water to the ground.

To add years to the roof lifespan an effective drainage system should be installed, which helps to get rid of water from the surface area of your roof covering. Water will certainly either end up in places you want it to be– or not– depending upon the measures you take.

How To Understand That Water Is In The Wrong Place?

1. Water inside the building. Possibly the worst location water could end up is inside the building. There, it typically results in the worst situations from damaging products to slip and falls and slowing down the production process.  If your roof covering is not properly maintained or rather old, water may penetrate the surface area and occur inside of the building. In this situation you’ve got a major leak problem waiting to take place.

2. Blisters. This is an indicator that water was vaporized in the heat of the sun rays while finding its way has found its way below the membrane layer of the roofing. This occurs when the roofing system’s surface is aging and also close to breaking down.

3. Spots of rust on the edges. To stop water from passing through the junction between the roofing system and its adjacent surface on the edges, roofers put a strip of metal called flashing.  When water drains right into spaces along the edges of the roofing, it has a noticeable affect on the flashing. Spots of rust generally mean that water is entering or behind something that it should not.

4. Discoloration of the ceiling, specifically ceiling tile, is one more indicator that water has actually passed through the building and also could be starting to mold.

How To Keep Water Where It Belongs?

To stay clear of finding these red flags of water damages in your structure, make certain that water find its way off the roof. There are three measures you can take to do this.

1. Roof  Inspections. This is the first line of defense for your roof. Routine inspections done by roofing professionals in your location can detect small issues and fix them until they become serious. During such inspections you can also get rid of fallen leaves and other debris and make sure water gets to the buildings drainage points factors.

2. Repair work. Along with routine roof inspections, it is a good idea to find a roofing company to provide repair work as the roof ages. Roofing Chattanooga Company offers a range of services and any kind of needed repairs will be  done for your roof to stay for decades. 

3. Plan your replacement. Any roof will wear out with time and its replacement my be expensive.  Waiting too long to change the roof covering could increase the expenses and lead to all kinds of troubles inside the building due to water damage. By  planning your roof replacement beforehand, you can protect yourself from unexpected issues and do everything in time.

There professional advice from Roofing Chattanooga will certainly help you to cope and prevent water damage. If you still have any questions about your particular roofing situation, we are always ready to answer them – just contact us! 

Leave a Reply